Features:
●1.High safety
Safety management on DC circuit;rapid fuse protection and arc protection
Multiplex battery protection system that guarantees safety
Intelligent leakage detection and refrigerant refilling system that improves overall safety
●2.High integration
High integration;easy for transportation and maintenance
Pre-assembled battery units enable easy site construction
System ready-for-use within 8h site construction
●3.Long service life
Smart cooling system ensures higher efficiency and longer battery service life
Modular design that facilitates capacity expansion
●4.Smart functions
Real-time status monitoring and fault recording that realizes fault alarming and positioning
Monitoring and recording of battery performance
Description:
This series is equipped with liquid cooling temperature control + intelligent PCS integrated energy storage cabinet, using military-grade design:
Ultra-wide voltage adaptation: the DC side voltage covers 648V~1497V, which can directly match the photovoltaic string and wind power converter
Intelligent power management: Built-in IEC62477 certified PCS, support reactive power compensation, harmonic suppression functions
Minimalist deployment: Prefabricated cabin structure, on-site only cable connection, commissioning cycle is reduced by 70%
MOQ:one (machine)
Specifications:
Model | MCI-215L-100K | MCI-233L-125K | MCI-372L-186K | MCI-418L-215K |
Rated power | 100kW | 125kW | 186kW | 215kW |
Celltype | LFP 3.2V/280Ah | LFP3.2V/314Ah | ||
Battery pack configuration | 1P240S | 1P60S | 1P416S | |
Total energy @BOL | 215kWh@25℃,0.5P | 233kWh@25℃,0.5P | 372kWh@25℃,0.5P | 418kWh @25℃,0.5P |
Voltage range at DC side | 648~864V | 702~936V | 1123.2~1497.6V | |
Voltage range at AC side | 400V(-15%~10%) | 400V(-15%~10%) | ||
Rated grid frequency | 50/60Hz±2.5Hz | |||
AC rated current | 151A | 181A | 282A | 326A |
Maximum PCS power conversion efficiency | 98.50% | |||
Way of connection to grid | 3W/N+PE | |||
Max.operating temperature | -30~55℃ | -40~55℃ | ||
Maximum efficiency | >88% | |||
Weight* | approx2400kg | approx2600kg | approx.3600kg | approx.3700kg |
Thermal control | Liquid-cooling | |||
Fire protection system | Aerosol/Perfluoro(Optional) | |||
Display | touch screen(optional) | |||
IP Class | IP54(Pack:IP67) | |||
Anti-corrosion class | C4 | |||
Humidity | 0~95%(Non-condensing) | |||
Dimension(L*W*H)* | 1000*1350*2300mm | 1400*1400*2400mm | ||
Maximum operating altitude | 2000m | |||
Communication | Ethernet/CAN/RS485 | |||
Communication protocol | MODBUS-RTU | |||
Certificates | GB/T34120,GB/T 36276,IEC62477,IEC62619,IEC63056 |
Applications:
Power optimization in heavy industry | Steel/electrolytic aluminum plant: With more than 315kVA transformers to achieve demand management, avoid excessive capacity electricityAutomotive manufacturing base: Buffer welding robot instantaneous high power impact, reduce transformer expansion pressure |
New energy power hub | DC side energy storage of photovoltaic power station: suitable for 1000V+ high voltage system, reducing DC/AC conversion lossWind farm black start power supply: provide 215kW/400V emergency power supply capacity |
grid-level frequency modulation service | 2-hour FM unit: SE418L-215K cabinet unit can provide 860kW/2h FM capacityFast response to AGC instructions: 98.5% conversion efficiency ensures second-level power response |
Special polar scenes | Arctic research station power supply: -40℃ ultra-low temperature start, IP67 protection against snowstormsDesert oil field energy storage: 55℃ high temperature continuous operation, C4 anti-corrosion response to salt spray erosion |
Advantages:
1.Military grade environmental tolerance
-40℃ extreme cold start technology, 55℃ full power operation without derating
C4 grade anti-corrosion coating, resistant to salt spray/acid rain/dust storm
2.Power electronics black technology
98.5% ultra-high conversion efficiency, 2% higher than the industry average
Support three-phase unbalanced load, harmonic distortion rate < 3%
3.Intelligent operation and maintenance system
Optional 10-inch touch screen, real-time display SOC/SOH/ charge and discharge curve
The Modbus-RTU protocol seamlessly connects to the SCADA/EMS system
4.Double insurance
Perfluorohexanone +Aerosol dual mode extinguish fire, extinguish open fire within 30 seconds
Thermal runaway early warning system, two hours ahead of time
5.Full life cycle service
10 years long warranty, capacity attenuation > 20% free replacement cell
Provide carbon footprint reporting to meet EU CBAM regulations
FAQ:
Q1: How to ensure the safety of 1000V HVDC system?
A: Triple protection design:
A fast fuse is configured on the DC side to cut off the short circuit within 15ms
Positive and negative double insulation monitoring, leakage current > 30mA automatic power off
The grounding resistance of the cabinet is less than 0.1Ω and passes the IEC63056 voltage test
Q2: Is the energy consumption of the liquid cooling system too high?
A: Adopt variable frequency pump + zone temperature control strategy:
Standby power consumption < 200W, full load power consumption < 1.2kW
Compared with the traditional scheme, energy saving 40%, comprehensive energy efficiency > 88%
Q3: What is the effect of 2000 m high altitude on heat dissipation?
A: Performance is ensured through three optimizations:
The liquid cooling pipe pressure is increased to 1.5 times the standard value
The radiator area is increased by 20% to compensate for the decrease in air density
The fan speed is adjusted intelligently to maintain the heat transfer efficiency
Q4: How to achieve rapid expansion?
A: Support "stacking between cabinets" technology:
Four SE418L-215Ks can be connected in parallel up to 860kW/1.672MWh
Parallel circulation < 1%, no additional balancing controller required
Q5: What operations are required for routine maintenance?
A: Intelligent maintenance-free design:
The internal resistance detection is performed automatically every 6 months, and the abnormal cell is marked automatically
The liquid cooling pipe is equipped with self-cleaning function, and the coolant is not replaced for 5 years
The fire prevention system self-checks every month, and the results are sent to the operation and maintenance platform